News and media

New Laboratory Development – Suppliers Required

Structural Investigation Services Ltd is carrying out a project to develop a new laboratory to service and grow existing work streams whilst offering an opportunity for further expansion, and is seeking quotes from suitable suppliers.

European Regional Development Fund funding is being sought to support this project.

The full specification can be found below and attached or obtained by emailing David Radley of Structural Investigation Services at david@structuralinvestigationservices.co.uk

The selection of the supplier will be based on an assessment of the following criteria:

  • Price
  • How you meet the specification
  • Proven track record and experience
  • Ongoing support

We invite applications from suppliers able to meet the scope of these requirements.

You should email your quote to David Radley of Structural Investigation Services at david@structuralinvestigationservices.co.uk by 5pm on 14th May 2022.

All suppliers who provide quotes will be informed in writing if successful or not.

Download Website Advert

Download Advert Specification

SPECIFICATION

Structural Investigation Services is carrying out a project to develop a new laboratory to service and grow existing work streams whilst offering an opportunity for further expansion and is seeking quotes from suitable suppliers.

European Regional Development Fund funding is being sought to support this project.

TECHNICAL REQUIREMENTS

We require the following products and services:

Scrubbed fume cupboard with drip cup and cold water, vacuum and chilled water flow and return.

Core drill – As required by BS EN 12504-1:2009

Compression testing machine – As required by BS EN 12504-1:2009

Scale – As required by BS EN 12504-1:2009

Callipers – As required by BS EN 12504-1:2009

Guage – As required by BS EN 12504-1:2009

Squares and gauges – As required by BS EN 12504-1:2009

Cast concrete mould – As required by BS EN 12390-1

Jaw crusher – As required by BS 1881-124:2015

Hammer mill – As required by BS 1881-124:2015

Chisel-edged hand tool – As required by BS 1881-124:2015

Disc Grinder – As required by BS 1881-124:2015

Gyratory mills – As required by BS 1881-124:2015

Mechanical operated mortar and pestle – As required by BS 1881-124:2015

Test sieves with apertures of 63 μm, 125 μm, 4.0 mm, 2.0 mm and 500 μm complete with the appropriate size of lid and receiver – As required by BS 1881-124:2015

Permanent bar magnet – As required by BS 1881-124:2015

Airtight bottles, made of glass or plastics and with a capacity of 100 mL to 500 mL – As required by BS 1881-124:2015

Saw, fitted with a diamond or carborundum blade – As required by BS 1881-124:2015

Device for sample reduction, e.g. a riffle box – As required by BS 1881-124:2015

Vacuum desiccator – As required by BS 1881-124:2015

Water pump – As required by BS 1881-124:2015

Vacuum pump – As required by BS 1881-124:2015

Airtight containers – As required by BS 1881-124:2015

Atomic absorption spectrophotometry – As required by BS 1881-124:2015

Thermogravimeter – As required by BS 1881-124:2015

Carbon dioxide instruments – As required by BS 1881-124:2015

Sulfide instruments – As required by BS 1881-124:2015

Ammonium chloride solution – As required by BS 1881-124:2015

Calcein (screened) indicator – As required by BS 1881-124:2015

Calcium standard solution – As required by BS 1881-124:2015

Threithanolamine solution – As required by BS 1881-124:2015

Sodium hydroxide solution – As required by BS 1881-124:2015

EDTA standard solution – As required by BS 1881-124:2015

Concentrated Hydrochloric acid – As required by BS 1881-124:2015

Dilute Hydrochloric acid – As required by BS 1881-124:2015

Ammonium hydroxide solution – As required by BS 1881-124:2015

Barium chloride solution – As required by BS 1881-124:2015

Methyl red indicator solution – As required by BS 1881-124:2015

Polyacrlamide solution – As required by BS 1881-124:2015

Polyethylene oxide solution – As required by BS 1881-124:2015

Sodium carbonate solution – As required by BS 1881-124:2015

Orthophosphoric acid – As required by BS 1881-124:2015

Starch solution – As required by BS 1881-124:2015

Potassium iodate standard solution – As required by BS 1881-124:2015

Sodium thiosulfate solution – As required by BS 1881-124:2015

Stannous chloride, solid – As required by BS 1881-124:2015

Ammoniacal zinc sulfate solution – As required by BS 1881-124:2015

Tetrachlorethylene – As required by BS 1881-124:2015

Analytical balances – As required by BS 1881-124:2015

Beakers – As required by BS 1881-124:2015

Volumetric flasks – As required by BS 1881-124:2015

Pipettes – As required by BS 1881-124:2015

Burettes – As required by BS 1881-124:2015

Filtration apparatus – As required by BS 1881-124:2015

Magnetic and mechanical stirrers – As required by BS 1881-124:2015

Ashless filter paper – As required by BS 1881-124:2015

Volumetric glassware – As required by BS 1881-124:2015

250 mL polypropylene beakers – As required by BS 1881-124:2015

Plastic stirring rods – As required by BS 1881-124:2015

Furnace – As required by BS 1881-124:2015

Container, of nickel, stainless steel or refractory material – As required by BS 1881-124:2015

Boiling water/steam bath – As required by BS 1881-124:2015

Desiccator – As required by BS 1881-124:2015

Flame photometer – As required by BS 1881-124:2015

Apparatus for the determination of carbon dioxide content – As required by BS 1881-124:2015

Apparatus for the determination of sulfur content – As required by BS 1881-124:2015

Apparatus for the determination of calcium oxide content – As required by BS 1881-124:2015

Apparatus for the determination of insoluble residue, soluble silica and calcium oxide – As required by BS 1881-124:2015

Apparatus for the determination of loss of ignition – As required by BS 1881-124:2015

Apparatus for the determination of sulfide – As required by BS 1881-124:2015

Apparatus for the determination of water combined content – As required by BS 1881-124:2015

Apparatus for the determination of water and cement content – As required by BS 1881-124:2015

Apparatus for the determination of cement content – As required by BS 1881-124:2015

Apparatus for the determination of aggregate porosity – As required by BS 1881-124:2015

Apparatus for the determination of aggregate combined water content – As required by BS 1881-124:2015

Apparatus for the determination of chloride content – As required by BS 1881-124:2015

Apparatus for the determination of sulfate content – As required by BS 1881-124:2015

Apparatus for the determination of sodium oxide and potassium oxide contents – As required by BS 1881 -124:2015

Reprogramming of existing company software systems to align with new laboratory and/or provision of a new laboratory specific software – one off payment

Laboratory Manager Technical Consultancy – 6 months – Service includes provision of laboratory manual, negotiation with suppliers, project management of laboratory setup and assessment of applicants for full time laboratory roles.

SELECTION:

The selection of the supplier will be based on an assessment of the following criteria:

  • Price
  • How you meet the specification
  • Proven track record and experience
  • Ongoing support

HOW TO APPLY:

Please submit your written quote by email to David Radley of Structural Investigation Services at david@structuralinvestigationservices.co.uk by 5pm on 14th May 2022.